Originally Posted by Elfmaze
qloaders are really cool. i figure i'd be spending at least 50 on a hopper and i try not to paint the world when i play so i don't see 100 rounds to be too much a problem. i think i might try it
A used QLoader may run you about $75 on PbNation, and you'll want at least 5 Qpods...trust me
my bob long cyclone 3 looks like a very big and heavy bolt.... does a lighter bolt affect the cycle rate?
Lighter and polished internals will always operate more smoothely
and how the he11 do you get a pin valve to unscrew from a co2 tank? i want to put an on off valve i have on it..
1st...make sure it's empty by pressing in the valve pin with your thumbnail.
2nd...heat the bottleneck with a heat gun, propane torch or long burning candle. It has to heat up to 225* for about 5 mins to make the locktite brittle enough to crack.
3rd...mount the tank in a padded vice but don't crush it
4th...take a large crescent wrench and turn out the valve.
To remount the valve, you will need RED LOCKTITE
...THERE ARE NO OTHER SUITABLE ALTERNATIVES PERIOD