View Single Post
Old 08-22-2011, 11:42 AM
tdawg tdawg is offline
New Guy
Join Date: Aug 2011
Posts: 2
Default Fenix ACS seer will not release

So here is the problem. When I pull the trigger, the fenix just clicks. Basically it does not appear that the system has the power to release the seer. So here is the background:
-Worked well for the start of the match. Ran about 100 balls through it on full auto and it worked perfectly.
-After about 45 minutes down time resumed play and it just clicked and would not release the seer..
-Re-charged the improvement
-Oiled the connection between seer and improvement
-Dialed down the spring pressure on the bolt to its minimum improvement.
-Replaced the capacitor with a new improvement.

If anyone can direct me to try something else, it would be greatly apprecitated. I am kind of at the end of my ideas, and really want to avoid taking it to a shop only to be told how worthless my marker is and be charged a $100
Reply With Quote