Thread: Air systems
View Single Post
  #5  
Old 06-30-2011, 10:53 PM
rayray88's Avatar
rayray88 rayray88 is offline
Member
 
Join Date: Jul 2009
Location: HIlife
Posts: 91
Default Re: Air systems

I thought about that too when I was doing things to mine. The reason why it won't work in a magazine is because 1: the foregrip is too small. By that I mean the tank is too wide and that foregrip is big enough to fit it. 2: the way the stock foregrip mounts to the mr1 body is by the long screws. Inside of the foregrip there are guides that help the screws align with the holes in the spyder body and also to serve as a way for those "catch" on to something so that it can tighten itself with the body. Sorry if that last part doesn't make sense, I tried my best to describe it. If you take off the foregrip and take a look at it you'll know what I mean. Then lastly if you try and use a real size ar15 magazine clip you'll end up with the same results as before where the tank is too big and the magazine/foregrip is too small. I tried to think of every way to conceal an air source too if that's what you're going for.
__________________
Spyder MR1/M4

Spyder MR1
Spyder Classic Single Trigger Frame
M16/AR15 Carry Handle
PCS MX-16 Barrel and Shroud
Rap4 Clamping Feedneck
6 Point Collapsible Stock
M16/AR15 Recoil Pad
M16/AR15 30rd Magazine
Custom Milled Side Cocking Slot by ACP
ACP Slim Delrin Striker with Side Cocking Hole
Spyder Classic Side Cocking Knob
Reply With Quote