View Single Post
  #1  
Old 05-02-2011, 08:37 AM
vinnycthatwhoibe's Avatar
vinnycthatwhoibe vinnycthatwhoibe is offline
New Guy
 
Join Date: Oct 2010
Posts: 14
Default Delrin Striker causes recocking issues

I recently was able to test out my new Delrin Striker and found that the gun has recocking issues. I've tried a few springs (both the valve spring and the regular spring), as well as adjusting the PSI.

The gun operates fine at around 400psi with the stock striker in there, but if I use the new striker with those same two springs it has issues. Both strikers are the same size, my only thought is it wants a specific spring combination that I can't quite determine. Any ideas on which way I should be leaning? Do I need to be using stiffer springs, lighter springs, a combination...?

Any ideas would be appreciated.
Reply With Quote