Re: Spyder Rodeo Stock regulator help...
Remove bottom hose from ASA
Two small brass screws using the RIGHT size allen key ( I find these to be very fragile) remove all the way
Pull reg from block being careful not to damage O-ring pull straight out.
On the stainless part ( not anodized ) using an adjustable wrench and a table cloth ( so you dont scratch it) twist the top portion of your regulator off.
looking in from the threaded end, you will see a brass disc. Very gently tap the knurled end to basically shake this brass disc out. Its T shaped and also fragile. Remove and carefully inspect the O-ring. Use the right one and replace, should fix your problem, if not post back for a further break down.