Originally Posted by rayray88
Check your bolt on inside your body maybe dirt got in there and scratched up the inside
If his bolt scratched up the upper bore, that not going to cause a leak out the barrel & frame.
I would check the cup seal first. Since air getting through there will lead to both the barrel & frame. Then if that doesnt work, pull the valve out & check the oring very close. Replace if needed & lube them. Before you put the valve back in hold the body up to light & inspect the lower bore from the front to where the valve sits.
Dow 55 is a grease that has an oring sweller in it to help provide a good seal. Same stuff used on Timmys.