PLEASE COMMENT
Well I Had Some Ball Detent problems but then i thought ill make my own so i did and i found that my idea work perfectly so i made some instructions so you guys could try it I Have a link
Instructions:
Step 1: get The Items You Need
2 Pins (or 3.5mm ball bearings)
1 Pen (Not Working)
Step 2: Pulling out the stick
pull The Stick Off The Pins with some pliers
open the pen and get out the spring and cut it in two with the pliers
Step 3: Putting detents in Gun
Remove your eye covers from the gun
take out detents that are in there
put pin head into detent hole
place the spring half onto pin head
carefully place the eye cover back on and screw it on
do the same to the other side
then looking through the barrel should look like
Step 4: Firing the gun
Well Just Fire it
Video Coming Soon
Please Visit PBWorld Also, link is in my signature