Spyder Forums

Spyder Forums (http://www.spyder.tv/forums/index.php)
-   General Spyder Forum (http://www.spyder.tv/forums/forumdisplay.php?f=2)
-   -   help (http://www.spyder.tv/forums/showthread.php?t=9751)

yamaha cow 03-09-2007 03:15 PM

help
 
i helped a friend out of a bind with ebay he put some reserve thing on 2 guns thinking he would only get one gun but no. he has no luck wat so ever but he got both guns. a psychobalistics lightning autococker. and a 2004 BKO. he asked me wich one ide like to have and ive always wanted an autococker (I know that the psychobalistcis autococker isn't a worrgames autococker)but he says he got it for $120 so i bought it. its one of those that doesn't have a reg or bottom line but i have a drop and ASA for it that will look perfecet. but i need to know what the input pressure has to be so i can find a reg for it.oh yah like i was just wondering its not electric so could i use CO2 on it though i have a compreesed air tank. is it possible to use CO2 on it? thx for all your help.

linkman_11 03-09-2007 07:49 PM

Re: help
 
your asking this on the SPYDER GUN forum because?

yamaha cow 03-09-2007 07:50 PM

Re: help
 
its in the general forum shut up and go back into ur corner its not helping to make fun................or wat ever ur not helpingness is doing.

shunut 03-09-2007 07:53 PM

Re: help
 
Because this forum is more than just a Spyder Gun forum and we are here to help. If you don't have anything constructive to add to this thread or you can't help him, I suggest you don't post. There are a lot of people on this forum who don't even own a Spyder anymore, they stick around because its a friendly forum that you can find help for any marker, not just Spyders. So in the future unless you are helping solve the problem, don't post. Thanks.

As for operating pressure, I think they operate around 3-400 psi, not 100% sure because I'm not a cocker guy. Pretty much any reg would be good.

yamaha cow 03-09-2007 07:59 PM

Re: help
 
what do stock ion regs go up to.

Muddytaco 03-09-2007 08:54 PM

Re: help
 
you can run co2 with no problems.

inline pressure should be around 350-400 psi

Oscum Guy 03-10-2007 05:02 AM

Re: help
 
Quote:

Originally Posted by yamaha cow
what do stock ion regs go up to.

stock ion reg not good. they are hard to adjust and not very consistent. i suggest a cp reg. not sure about the ion regs but the cp hp reg ranges 0-500 and the lp 0-300.


ion regs are comfy tho.

Backmanshooter 03-10-2007 05:14 AM

Re: help
 
How are ion regs hard to adjust? Because you need a wrench? Pssh. Its not that hard.

Oscum Guy 03-10-2007 05:20 AM

Re: help
 
yes. lol. and maybe its just me cuz i sometimes turn the screw the opposite way. no, more like half the time.



a harder reg to adjust tho is the evil detonator. thats one reason i like my cp reg.

Backmanshooter 03-10-2007 05:22 AM

Re: help
 
Ah. detonators are hard. I had a few and didnt like them. Now they are cheap. :p


All times are GMT -8. The time now is 07:07 PM.