Spyder Forums

Spyder Forums (http://www.spyder.tv/forums/index.php)
-   Electronic Markers (http://www.spyder.tv/forums/forumdisplay.php?f=92)
-   -   O-Rings? (http://www.spyder.tv/forums/showthread.php?t=3590)

viseversa2303 05-28-2006 10:36 AM

O-Rings?
 
Where are the O-rings that i have to oil up....? If anyone can show me a link to where i can take apart my gun and oil these up that will be great...

druid 05-28-2006 11:55 AM

Re: O-Rings?
 
pick your manual http://www.spyder.tv/section/support...s_manuals.html

where's the diagram that came with it? make sure you have the proper allen wrenches to take the grip frame off the marker body.

degas your marker. Look at the back. In between the top and bottom tube is a pin that goes through the center of them...from left to right side. Remove the pin but be careful, everything's under spring tension. Remove the back-plate. pyll the bolt back and out of the marker. It's connected to the striker (hammer) in the bottom tube. Oil all the Orings you see and reassemble in the reversed order it came apart.

viseversa2303 05-28-2006 04:11 PM

Re: O-Rings?
 
One more thing i was shooting my paintball with a gravity hooper and for some reason it didnt sound as strong that it did when i bought the gun and i was dry firing.. I wanted to know how to i adjust the velocity on my gun.....i know to turn the knob but is it right for a higher fps or left?

Thank you

viseversa2303 05-28-2006 04:21 PM

Re: O-Rings?
 
I just started reading the manual and it states "Do Not Dry Fire"

What happens if i did could that be my problem?

TheRedBarron 05-28-2006 04:58 PM

Re: O-Rings?
 
you turn the knob in for a higher velocity, out for lower.

and dry firing your marker is perfectly 100% ok

Frat 05-28-2006 08:06 PM

Re: O-Rings?
 
Make sure you are not using a petroleum based oil for your o-rings. Clean and lube often and you will not have many mechanical issues. Dry firing is just extra wear and tear on your gun but should not hurt it too much.

viseversa2303 05-29-2006 03:55 PM

Re: O-Rings?
 
thanks for you help

viperx6x9x 05-30-2006 11:07 AM

Re: O-Rings?
 
speaking of o rings. i oil mine before and after i use the marker. yet this last time when i took it apart afterwards one of the rings was really loose. I use C02 chich i understand can freeze o rings if you shoot too fast. i never shoot fast as i play sniper style woods and havent used it in speedball yet. anyways its on that vertical adapter behind the low pressere chamber, theres 2 inline orings, its the one towards the back of the marker. its an #015 80D o ring according to the diagram.

I'm confused cuz cold makes things contract, not expand. so why did the oring expand and get so loose it wouldnt stay on and had to replace it.

vwjimmy 12-20-2006 08:27 PM

Re: O-Rings?
 
The CO2 can penatrate the o ring and modify its chemical structure causing it to swell.
You are using Marker oil right? Regular oils will swell o rings too.


All times are GMT -8. The time now is 06:24 PM.