Spyder Forums

Spyder Forums (http://www.spyder.tv/forums/index.php)
-   General Spyder Forum (http://www.spyder.tv/forums/forumdisplay.php?f=2)
-   -   Spyder MR100 Feedneck (http://www.spyder.tv/forums/showthread.php?t=22076)

Wolfrum 04-17-2012 09:40 AM

Spyder MR100 Feedneck
 
Hi there everyone,

Does anyone (Kingman included) know what screw and nut combo they use for the MR100 Pro's feedneck?

Or, as an alternative an aftermarket feedneck that fits properly onto the MR100 Pro.

-Wolf

TheDarkShadow 04-17-2012 10:37 AM

Re: Spyder MR100 Feedneck
 
I'd contact kingman personally and find out (through customer service)

bigred76 04-17-2012 10:50 AM

Re: Spyder MR100 Feedneck
 
Take your feedneck off the marker and take it down to Home Depot, Lowes, or any other local hardware store that sells loose screws (or screws in baggies). Compare the screw to the hole and find one that'll fit, then a nut to match the threads that'll fit. I believe the stock size is metric, but there is almost always a standard equivalent.

If you call Kingman, the part number is SCR048. They simply refer to it as a "Feed Neck Clamp Screw & Nut" in the manual.

Wolfrum 04-17-2012 12:55 PM

Re: Spyder MR100 Feedneck
 
Thanks, I did send them an email as well in hopes their customer service or technical support can help. Though in the past the wait times to be answered can be a bit extreme.

Otherwise , I will go to a local HW store in hopes to finding something close, I just like keeping things original thats all.

-Wolf


All times are GMT -8. The time now is 08:23 PM.