Spyder Forums

Spyder Forums (http://www.spyder.tv/forums/index.php)
-   Electronic Markers (http://www.spyder.tv/forums/forumdisplay.php?f=92)
-   -   Fenix ACS just clicking (http://www.spyder.tv/forums/showthread.php?t=21941)

tdawg 08-22-2011 11:34 AM

Fenix ACS just clicking
 
So here is the problem. When I pull the trigger, the fenix just clicks. Basically it does not appear that the system has the power to release the seer. So here is the background:
-Worked well for the start of the match. Ran about 100 balls through it on full auto and it worked perfectly.
-After about 45 minutes down time resumed play and it just clicked and would not release the seer..
-Re-charged the battery.....no improvement
-Oiled the connection between seer and bolt....no improvement
-Dialed down the spring pressure on the bolt to its minimum setting....no improvement.
-Replaced the capacitor with a new one....no improvement.

If anyone can direct me to try something else, it would be greatly apprecitated. I am kind of at the end of my ideas, and really want to avoid taking it to a shop only to be told how worthless my marker is and be charged a $100

shunut 08-22-2011 03:07 PM

Re: Fenix ACS just clicking
 
Please only post a discussion in one spot on the forum. I will leave the other one open since somebody already posted in it.


All times are GMT -8. The time now is 08:04 PM.