Spyder Forums

Spyder Forums (http://www.spyder.tv/forums/index.php)
-   Discontinued Markers (http://www.spyder.tv/forums/forumdisplay.php?f=94)
-   -   Where to lube mr2 (http://www.spyder.tv/forums/showthread.php?t=21523)

MYNEWMR2 11-08-2010 09:20 AM

Where to lube mr2
 
what parts of the gun need lubrication on the mr2? (pics would be awesome)

THUNDR 11-08-2010 09:38 AM

Re: Where to lube mr2
 
Just put a few drops of oil into your ASA before you screw in your air tank, then fire it a few times to cycle the oil around. You can also oil the O-rings on the striker seperately, and the same for the bolt if you have one with O-rings (stock MR2 bolt does not). If you are using a remote line with a slide check, make sure you oil that too before you air up. The o-rings inside the slide check can cause problems if not kept lubricated.

MYNEWMR2 11-08-2010 09:52 AM

Re: Where to lube mr2
 
thanks thundr. Man, you are all over this forum.

bigred76 11-08-2010 11:52 PM

Re: Where to lube mr2
 
It's not that simple. While that will get most of the orings, when you take apart your marker (which you should do every 3-5 times you go out and play), you should lube all the orings with one drop to a drop and a half of oil, and all the moving parts lightly. Make sure to use a synthetic paintball oil as well, since Hoppes and the like tend to eat orings.


All times are GMT -8. The time now is 09:25 PM.