Spyder Forums

Spyder Forums (http://www.spyder.tv/forums/index.php)
-   Veteran Forum (http://www.spyder.tv/forums/forumdisplay.php?f=3)
-   -   MR-1 Burping/Farting problem (http://www.spyder.tv/forums/showthread.php?t=21147)

Ethanb06 05-08-2010 07:50 AM

MR-1 Burping/Farting problem
 
I have had my mr1 for 3 yeaars now and ive never had any problems with it, but now i cant get it to work properly. at first it works fine for the first couple shots then it start burping like im out of co2 when i know for a fact that im not. ive completely takin apart the gun and all the o-rings are fine, im wondering if its the spring also not sure how to tell. can someone please help me out?

oldironmudder 05-08-2010 07:55 PM

Re: MR-1 Burping/Farting problem
 
Have you oiled it?

Ethanb06 05-09-2010 07:17 AM

Re: MR-1 Burping/Farting problem
 
very much so, i oil it after every use, i try to take good care of it.

paintBALLfreak347 06-27-2010 10:09 AM

Re: MR-1 Burping/Farting problem
 
this is probly not the problem but did u check the o-ring on the co2

Hob Hayward 06-29-2010 08:56 AM

Re: MR-1 Burping/Farting problem
 
Are you sure your tank has enough air? Does it still shoot 285fps for those first few shots?

Ethanb06 07-26-2010 06:14 AM

Re: MR-1 Burping/Farting problem
 
The o-ring on my co2 is fine ive even replaced it to make sure.
and when the problems first happend i thought i was out of co2 i got it refilled and the gun was still acting up.
I was told to try stretching out my spring, which i did with no results

slim and shady 07-26-2010 02:45 PM

Re: MR-1 Burping/Farting problem
 
Replace your striker oring


All times are GMT -8. The time now is 08:58 AM.