Spyder Forums

Spyder Forums (http://www.spyder.tv/forums/index.php)
-   Discontinued Markers (http://www.spyder.tv/forums/forumdisplay.php?f=94)
-   -   Remove Expansion Chamber from TL (http://www.spyder.tv/forums/showthread.php?t=20541)

rayray88 09-06-2009 06:40 PM

Remove Expansion Chamber from TL
I'm trying to get my expansion chamber off and it's really hard. What I'm trying to is take it off so i can screw my tank straight in. i was wondering if the vertical adapter is like the Compact 2-in-1 where you can just switch out the hose with the tank. If it is I'll keep trying to take it off. But I couldn't get it of with a vice grip and vice. I was also wondering if there was lock tite on it or something also. I don't want to mutilate the expansion chamber cause I still want to use it if i ever have to play with co2 again. Thanks.

XSiv Force 09-06-2009 06:51 PM

Re: Remove Expansion Chamber from TL
any chance of it being held on by two tiny allen head screws near the V/A? I know on my TL-R it isnt a screw in V/A

rayray88 09-06-2009 07:34 PM

Re: Remove Expansion Chamber from TL
I have the OLD TL like it's not a even a TL-Plus but I'm using the diagram I found online for TL-Plus because they're pretty much identical. The only small allen screws were for that shroud thing on the top where the barrel screw into the body.

I found this one on ebay, it looks the same, but I'm just not sure.
http://cgi.ebay.com/SPYDER-VERTICAL-...p3286.c 0.m14

buffblackbird2002 09-06-2009 09:11 PM

Re: Remove Expansion Chamber from TL
it should screw right off. maybe someone monkey f*&ked it on and now you need to get the cursing out of the way and remember its lefty loosey. have some coco rum and juice like me and get r done. good luck.

DFSniper 09-07-2009 05:54 AM

Re: Remove Expansion Chamber from TL
get a strap wrench. or try putting some wd-40 or luquid wrench by the threads.

rayray88 09-14-2009 01:46 PM

Re: Remove Expansion Chamber from TL
Sorry guys I give up on this one. It's not coming even with wd-40. i don't know what else to do, i even strap clamped it. i'm out of ideas :confused: I did just screw the bottom asa into the ex.chamber and that was fine except for a huge leak. Then i when i went to unscrew the tank the asa unscrew instead the tank...resulting in extreme loss of co2, a freezing asa and a blown up ex.chamber :cool: So i think im just gonna get a va from a compact or something and one where i can still keep my volumizer.

All times are GMT -8. The time now is 10:57 PM.