Spyder Forums

Spyder Forums (http://www.spyder.tv/forums/index.php)
-   Mechanical Markers (http://www.spyder.tv/forums/forumdisplay.php?f=93)
-   -   Upgrades help (http://www.spyder.tv/forums/showthread.php?t=20030)

Suomi 05-13-2009 12:22 PM

Upgrades help
 
I want to make my MR1 my main gun now and I'm having trouble finding a bolt that fits it. The only bolts I know of that fits it is the ACP bolts and I don't think I want one.
For my barrel I was thinking a J&J 12in or a RAP4 barrel. Has anyone used the RAP4 barrel? If I got it I was thinking I would be able to get barrel kits and stuff down the road. Also the RAP4 comes in 7/8in and 1in whats the difference?
Right now all I have on it is a spring kit and velocity booster. Thanks for the help.

ditbu13oi 05-13-2009 02:22 PM

Re: Upgrades help
 
SEARCH!!! Theres plenty of upgrades around this thread.

pntballer5634 05-13-2009 04:25 PM

Re: Upgrades help
 
ok, just go with the ACS bolt, you don't need anything more. i've heard much better things about the J&Js, and rap4 is over priced. and the diff is one is 1 inch outer diameter, while the other is 7/8". also, im ordering a J&J so go with that

Taillo 05-14-2009 01:02 PM

Re: Upgrades help
 
Rap4 barrels are very tight-bore, i have a spyder classic with a problem with the ball detent. The ball would just not stay in the gun while pointed downward, they roll straight trough a j&j. switched barrels, now the rap4 act as ball detent. This could cause chops depending on the marker.

On my experience, a j&j has better range and overall accuracy than a rap4, but the rap4 has something special hard to describe. It feels more ballistic, and the shots are affected by wind in a different manner than other barrels, its a bit more controlable if you can spot wind direction.


All times are GMT -8. The time now is 11:58 PM.