Spyder Forums

Spyder Forums (http://www.spyder.tv/forums/index.php)
-   Mechanical Markers (http://www.spyder.tv/forums/forumdisplay.php?f=93)
-   -   Vertical Adapter (http://www.spyder.tv/forums/showthread.php?t=19974)

JumboNuts 05-07-2009 08:11 PM

Vertical Adapter
 
There are 2 o-rings on it that are #015 80D. I put on new ones and it leaks a lot, the #09 rings. The old ones were all cracked. Is the part defective? it was working for some time. the gun is 3years old only use 5 times :confused: :confused:

ferret15 05-07-2009 08:35 PM

Re: Vertical Adapter
 
on the outer most o-ring, replace that with a tank o-ring

on the inner o-ring i recommend saving you tank o-rings and just buying a faucet oring from the hardware store.


oh o-rings dry up and need to be lubed up or replaced to continue to hold a seal. I suggest you buy some paintball oil and re-lube your entire gun accordingly so its ready to go with out the worry of it breaking.


All times are GMT -8. The time now is 10:08 PM.