Spyder Forums

Spyder Forums (http://www.spyder.tv/forums/index.php)
-   Discontinued Markers (http://www.spyder.tv/forums/forumdisplay.php?f=94)
-   -   Custom Ball Detents (Instructions) (http://www.spyder.tv/forums/showthread.php?t=19274)

D4RKKNIGH7 01-31-2009 03:51 PM

Custom Ball Detents (Instructions)

Well I Had Some Ball Detent problems but then i thought ill make my own so i did and i found that my idea work perfectly so i made some instructions so you guys could try it I Have a link


Step 1: get The Items You Need

2 Pins (or 3.5mm ball bearings)

1 Pen (Not Working)

Step 2: Pulling out the stick

pull The Stick Off The Pins with some pliers

open the pen and get out the spring and cut it in two with the pliers

Step 3: Putting detents in Gun

Remove your eye covers from the gun
take out detents that are in there
put pin head into detent hole

place the spring half onto pin head

carefully place the eye cover back on and screw it on

do the same to the other side

then looking through the barrel should look like

Step 4: Firing the gun

Well Just Fire it

Video Coming Soon

Please Visit PBWorld Also, link is in my signature

TheDarkShadow 01-31-2009 04:23 PM

Re: Custom Ball Detents (Instructions)
that's pretty cool

fatkidfrompbaz 01-31-2009 04:25 PM

Re: Custom Ball Detents (Instructions)

slim and shady 01-31-2009 04:31 PM

Re: Custom Ball Detents (Instructions)
Hey great job I like that

D4RKKNIGH7 01-31-2009 05:26 PM

Re: Custom Ball Detents (Instructions)
Instructions now in first post

stevet 04-14-2011 08:04 PM

Re: Custom Ball Detents (Instructions)
Man you rock,
ive been chewing thru them and tried your pin idea and it works so sweat, and the balls are actually flying straighter and further at same velocity setting.
amazing $1.50 for a couple of pins and a pen instead of $10 for a set of actual ball detents priceless. you should sell the idea to Spyder:D

shunut 04-15-2011 04:59 AM

Re: Custom Ball Detents (Instructions)
Very cool and creative :up:

Lawpass 04-18-2011 07:47 AM

Re: Custom Ball Detents (Instructions)
Nice idea!

vikingshadow 04-18-2011 02:02 PM

Re: Custom Ball Detents (Instructions)
Nice idea - even when it was done back in 2009, LOL! Holy necroposting, batgirl!

Just kidding - it is a good idea.....never got to try it, actually.

mazzon 06-07-2011 07:30 PM

Re: Custom Ball Detents (Instructions)
my holes on my vs1 didnt fit the pin heads. and i broke ,my eye covers so imade some out of high temp hot glue and used the glue as ball dents seemed to work with test fire . looks ghetto.

All times are GMT -8. The time now is 03:53 PM.