Spyder Forums

Spyder Forums (http://www.spyder.tv/forums/index.php)
-   Mechanical Markers (http://www.spyder.tv/forums/forumdisplay.php?f=93)
-   -   esp (http://www.spyder.tv/forums/showthread.php?t=1469)

QRFleader 02-14-2006 10:15 AM

esp
 
I ran an egrip off of an e99 over the weakend, it did nothing but break paint. I was a little disapointed, but as far as running the simi grip that came with it I have shot 4 cases of paint without a break

Kingman-Rep 02-14-2006 10:52 AM

Re: esp
 
You will most likely need to change the bolt. The sear that sits inside a mech frame sits a little further back than the sear that sits inside an eframe. put the eframe on and look to see if you see the bolt sitting forward?

ooglieboogliebob 02-15-2006 02:31 PM

Re: esp
 
hmm .. i personally think the stock bolt is pretty good ... have you tried otterizing your bolt ??? Also, have you tried polishing ?? ... always remember to clean and relube your gun after every game. Also lube anything that moves ... always good for the gun :) ... also check for bad o-rings.
Bolt Mod
Polishing

QRFleader 02-16-2006 08:48 AM

Re: esp
 
oh yea, I treat it like one of my real guns, It stayes cleaned and inspected

ooglieboogliebob 02-16-2006 02:36 PM

Re: esp
 
hmm ... im not sure what to tell you ... is it a barrel break or a bolt break ??

make sure you have a good paint to bore match on your gun


All times are GMT -8. The time now is 04:12 PM.