Spyder Forums

Spyder Forums (http://www.spyder.tv/forums/index.php)
-   Electronic Markers (http://www.spyder.tv/forums/forumdisplay.php?f=92)
-   -   Gun Won't Blowback (http://www.spyder.tv/forums/showthread.php?t=3036)

Slammed0 04-30-2006 04:30 PM

Gun Won't Blowback
 
My gun was working fine one minute and the next wouldn't blowback. I thought I was out of CO2, but I wasn't. It will click forward one and thats it. Anybody have any suggestions?

ooglieboogliebob 04-30-2006 05:33 PM

Re: Gun Won't Blowback
 
pull it back and shoot it again :) ... if it still shoots 275fps - 300fps and it just doesn't recock .. you got yourself a pump .. ;)

pman15 04-30-2006 05:47 PM

Re: Gun Won't Blowback
 
u mean u have to recock the gun after every shot?

vikingshadow 04-30-2006 05:58 PM

Re: Gun Won't Blowback
 
Pull your striker and bolt out of the gun and clean them really well. Then oil the orings (you might think of changing them to new ones.)

If that doesn't work, check your ASA to make sure nothing's blocking the air passage. There's a little filter in there that may be clogged.

Slammed0 04-30-2006 06:03 PM

Re: Gun Won't Blowback
 
Ya, the gun shoots when you pull the tigger but the bolt won't cock back. I am in the process of checking it out now. I will clean everything. The LPC was loose and when I unscrewed it the Oring fell off and was HUGE. Like it expanded. So, I will replace that too. Thanks guys!

If none of that works, well, 1 year warranty.

Hob Hayward 04-30-2006 06:50 PM

Re: Gun Won't Blowback
 
Yeah, co2 will do that, maybe a peice of o-ring got stuck somewhere. I've seen o-rings completely having ripped apart and swollen up in the valve chamber.

druid 04-30-2006 08:20 PM

Re: Gun Won't Blowback
 
and check/clean the filter screen in the VA...

Frat 05-01-2006 08:21 AM

Re: Gun Won't Blowback
 
unless you have broken the body there shouldn't be a reason to send it back. If it is shooting (I take that to mean you are getting FPS) then it is getting air and you are probably not gummed up. I would look really hard at your striker o-ring. if it is split or worn on one side it will let the CO2 blow by and not recock the striker.

Zenin 05-01-2006 11:03 AM

Re: Gun Won't Blowback
 
Quote:

Originally Posted by Hob Hayward
Yeah, co2 will do that, maybe a peice of o-ring got stuck somewhere. I've seen o-rings completely having ripped apart and swollen up in the valve chamber.

Yep. This was exactly the case this last Saturday with a friend's gun. The inner of the two o-rings on the VA expanded and shreaded, leaving a piece of itself to get wedged up in the value spring works and cause the gun to fire but not recock.

The hammer o-ring could be a problem too...but so far I've seen four Spyders with recock issues and they were all valve related (including mine...when I was dumb and put the valve block in backwards and it leaked like hell).

Slammed0 05-01-2006 05:24 PM

Re: Gun Won't Blowback
 
Well guys I got it working again. I'm not really sure what I did :lol: but it worked. I took the entire gun apart. I cleaned the body and the bolt. It was pretty dirty. I must have chopped a ball pretty bad and it got in there. I put it all together and it is running smooth again. Maybe the paint was gumming it up? Thanks for the help though.


All times are GMT -8. The time now is 04:19 AM.