Spyder Forums

Spyder Forums (http://www.spyder.tv/forums/index.php)
-   Discontinued Markers (http://www.spyder.tv/forums/forumdisplay.php?f=94)
-   -   Air issues (http://www.spyder.tv/forums/showthread.php?t=18036)

slim and shady 08-10-2008 06:41 PM

Air issues
 
Ok problem:my MR2 with eye is having serious air isues I shoot then it burps like its out of air. I turn the velocity up a little bit and shout 50 RNDs or so and then it does it again. Striker ring is fine I havnt had this trouble with a cup seal before, could it be that? anyway im looking for a diferent aproch or angle to this question so what do you think the problem could be?

EDIT: I use HPA as well as a remote, tried it without the remote same problems. It was hot out and velocities were all over the place even with HPA.

majorissuez99 08-11-2008 01:35 AM

Re: Air issues
 
Have you tried a diffrent air tank?
Possibly the regulator on the tank went for a shi*


Ill try to think up some more possibilities here

slim and shady 08-11-2008 07:02 AM

Re: Air issues
 
Air tank worked fine on my MR1 afterwards.

slim and shady 08-11-2008 07:32 PM

Re: Air issues
 
Got it figured out now thanks guys.

sneekypete 08-12-2008 04:42 PM

Re: Air issues
 
So what was the problem.

slim and shady 08-12-2008 05:39 PM

Re: Air issues
 
Im not even sure i compleatly tore the whole gun appart, put a new striker ring oiled it good polished the pin took it out back and it worked great. i striped the launcher off too. Im gonna play without it a few times till im sure the marker is where I want it to be before I put it back on so I dont have the same problem and have to strip everything off again.


All times are GMT -8. The time now is 03:49 AM.