Spyder Forums

Spyder Forums (http://www.spyder.tv/forums/index.php)
-   Discontinued Markers (http://www.spyder.tv/forums/forumdisplay.php?f=94)
-   -   Vertical adapter o-rings (http://www.spyder.tv/forums/showthread.php?t=2426)

divvichild 04-01-2006 08:09 PM

Vertical adapter o-rings
 
ok, so i came home today after paintballing and i took my gun apart for cleaning. when i began to remove the vertical adapter, the o-rings burst and came flying through the screw hole. I just need to know if i can replace them with a tank o-ring since i have a ton of those.

NB_Hacker_NB 04-01-2006 11:25 PM

Re: Vertical adapter o-rings
 
They may be a little hard to put on, but once they are stretched a little, they'll be fine.:rolleyes:

SparkyGT 04-02-2006 01:46 AM

Re: Vertical adapter o-rings
 
sounds like ya still had pressure in the gun, did ya dryfire till it was out?

tex 04-02-2006 09:44 AM

Re: Vertical adapter o-rings
 
Tank o-rings will work on just about any seal except the hammer.

ooglieboogliebob 04-02-2006 11:10 AM

Re: Vertical adapter o-rings
 
actually ... they probably'll seal all of them ... but i'd probably not recommend it ... just get some o-rings at your local hardware store ... way cheaper

ad0131065 04-02-2006 11:29 AM

Re: Vertical adapter o-rings
 
Quote:

Originally Posted by ooglieboogliebob
actually ... they probably'll seal all of them ... but i'd probably not recommend it ... just get some o-rings at your local hardware store ... way cheaper

yea they're like 25 cent at home depot

divvichild 04-02-2006 04:24 PM

Re: Vertical adapter o-rings
 
yeh, i dry fired it till it was out. the o-rings worked fine, i thought they would since they're the same size as every other o-ring except the striker.

ooglieboogliebob 04-02-2006 07:07 PM

Re: Vertical adapter o-rings
 
eh ... then i guess you can use them ... i'd rather go to the hardware store and buy those o-rings though .. WAY cheaper ....


All times are GMT -8. The time now is 05:10 AM.