Spyder Forums

Spyder Forums (http://www.spyder.tv/forums/index.php)
-   Mechanical Markers (http://www.spyder.tv/forums/forumdisplay.php?f=93)
-   -   E-MR1 dropping pressure (http://www.spyder.tv/forums/showthread.php?t=19684)

buhhda05 03-29-2009 05:26 AM

E-MR1 dropping pressure
 
I just bought an EMR1 and the first time I took it out, I started playin on full auto and the bolt wouldn't always recock completely. What can I do? When I bought the gun I also purchased a volumizer with it but it wouldn't fit on the marker b/c it was threded and my marker wasn't. Any help resolving these issues would be greatly appreciated

irishwarrior 03-29-2009 06:49 AM

Re: E-MR1 dropping pressure
 
Well, if you're using CO2 you could be experiencing shoot-down, causing the bolt to fail to recock. You could also be exceeding the cyclic rate of the MR1. And short of threading the marker, there isn't much you can do about the volumizer you have.

ProX 03-29-2009 08:23 AM

Re: E-MR1 dropping pressure
 
Yes to the above, or a lesser possibility could be that it needs some oil.

slim and shady 03-29-2009 06:23 PM

Re: E-MR1 dropping pressure
 
Quote:

Originally Posted by irishwarrior (Post 234930)
Well, if you're using CO2 you could be experiencing shoot-down, causing the bolt to fail to recock. You could also be exceeding the cyclic rate of the MR1. And short of threading the marker, there isn't much you can do about the volumizer you have.

:yeahthat:


:rolleyes: Irish thinks he knows everything :p

irishwarrior 03-29-2009 06:28 PM

Re: E-MR1 dropping pressure
 
I don't think I know everything, I know I know everything ;)

slim and shady 03-29-2009 06:30 PM

Re: E-MR1 dropping pressure
 
:lolsign:

buhhda05 04-04-2009 11:44 AM

Re: E-MR1 dropping pressure
 
I appreciate all of the suggestions. I did find that Trinity paintballs seems to make a volumizer that might fit on my gun.


All times are GMT -8. The time now is 01:33 AM.