Spyder Forums

Spyder Forums (http://www.spyder.tv/forums/index.php)
-   Custom Shop (http://www.spyder.tv/forums/forumdisplay.php?f=35)
-   -   loctite question (http://www.spyder.tv/forums/showthread.php?t=15508)

DFSniper 02-20-2008 08:38 AM

loctite question
 
i went to lowes to look for loctite, but they didnt have the blue stuff. they had red and about 20 different types of epoxys and "specialized" loctite. i was wondering if the plumbing/marine loctite would work. if not, what would be the best type to get.

vwjimmy 02-20-2008 02:19 PM

Re: loctite question
 
What are you using it for?

DFSniper 02-20-2008 03:07 PM

Re: loctite question
 
feedneck/trigger frame screws mainly, but i want to be able to use it for macro fittings too.

vwjimmy 02-20-2008 03:14 PM

Re: loctite question
 
Usually the marine stuff is pretty stout. I think I would hold out for blue for the trigger frame screws and use teflon thread sealer (liquid or tape) on the macros.
Try an auto parts place....guys like me use alot of blue Loctite :)

DFSniper 02-20-2008 03:25 PM

Re: loctite question
 
i'm using tape on the fittings right now, but it doesnt hold too well on the screws. i'll check around at the auto shops for blue loctite tomorrow. thanks.

Kenny_McCormic 02-21-2008 12:17 PM

Re: loctite question
 
Go to a car parts store.

bamf-hacker 02-21-2008 12:25 PM

Re: loctite question
 
Do not use Blue Loctite on the threads of air fittings. It is a thread locker not a thread sealer. if you want to use the Loctite thread sealer it is 545 and is made to seal threads. You can get it from most of the big online resellers but it is not cheap.


All times are GMT -8. The time now is 02:31 PM.