Spyder Forums

Spyder Forums (http://www.spyder.tv/forums/index.php)
-   Air Systems (http://www.spyder.tv/forums/forumdisplay.php?f=34)
-   -   Air Questions (http://www.spyder.tv/forums/showthread.php?t=20052)

Ali G 05-16-2009 08:02 AM

Air Questions
well here is another noob question

what is the difference between low and high presure air systems

and what would be recommended

Hossy 05-16-2009 08:39 AM

Re: Air Questions
I would recommend getting an HP tank.
LP was made more for older angels.

If your talking about operating pressure, LP is better, but at the same time it could cost a lot. Assuming you have a MR1 as your sig says, You should stick with HP. If you really wanted a LP gun it would be wiser IMO to buy a low-mid end gun. It would save you money and save you time, plus you get a nice new gun.

Erlkonig 09-21-2009 05:15 PM

Re: Air Questions
A bit belated I know, but I wanted to share my thoughts...

I have just gotten my MR-1 back together and have been able to drop the operating pressure down into the 250-275psi range by just polishing the bolt and striker, removing the venturi from the stock bolt and adding a Palmers Direct Stab to actually drop the pressure down.

As far as high pressure and low pressure bottles, I would recommend the high pressure bottle just to cover the bases...If you put a secondary regulator on there (which is a good idea anyway since most HPA bottles have fixed regs), or have one already, you can drop it to what you need and double regging keeps things that much more consistant...

Otters site always said that when regulating for every 75psi worth of pressure drop you had in the tank going into the reg you would typically see a 1psi increase in the output pressure of the reg...

All times are GMT -8. The time now is 06:53 AM.