PDA

View Full Version : victor 1 questions


Kenny_McCormic
03-22-2007, 05:44 PM
well id like to start out with im a total noob at pb so try not to flame me for being a bit stupid.
I just won a victor 1 on ebay and i have a question about it
i want to add a front grip like on the victor 2. Will a victor 2 block/grip thingy (im not sure what you call it the part that the low pressure chamber and front grip attaches too) fit on the victor 1? and can i remove the stock grip from the victor 2 thingy and replace it with a reg later?

hjennings
03-22-2007, 10:09 PM
To your first question, yes. To your second question, no.

If you want to upgrade your Vic I to a Vic II see if you can get the front block off of a Vic II guy that's upgraded to a reg or x-chamber.

If you want to upgrade to a reg or X-chamber now you'll have to get a different front block.

Kenny_McCormic
03-23-2007, 07:34 AM
Ok thanks a bunch.

Kenny_McCormic
03-26-2007, 04:33 AM
could you please give me a lst of what guns have a front block that will accept a regulator as i dont want to spent $30 on an aftermarket one. Yes i know it will need to be drilled out if i want to use it for lp but i have access to a drill press so i dont have a problem with that.

SupaSnipa
03-26-2007, 11:57 AM
anything semi auto exept the old compacts and classic & obviously u cant change it from the MR-1, 2, or 3

Kenny_McCormic
05-21-2007, 06:51 PM
another question what is the purpose of that littlebrass filter in the asa other than to restrict flow?should i remove it?

vwjimmy
05-21-2007, 07:02 PM
It is a filter...not a restrictor...
Especially if you are using CO2, you should leave it in, but it will not hurt no matter the propellent you use....
Leave it in there.

Kenny_McCormic
05-21-2007, 07:08 PM
mkay then thanks a bunch