PDA

View Full Version : VS3 problem.


Jack In The Box
03-18-2007, 04:33 PM
Sorry, just noticed another thread on this subject, didnt mean to duplicate.

I just got this marker not more than 2-3 weeks ago, and the first time I gassed it up, I noticed the leak. I have gone over the disassembly manual and tried to fix the problem, but got no results.

I would really appreciate any help. It seems to be leaking from the bottom line regulator. I cant seem to narrow it down to an exact location, so I am asking if anyone knows what I might do to fix this problem.

Thanks.

PBBLITZ
03-19-2007, 02:16 PM
Actually, im not sur wheter this is the same leak as urs but, if is leaking on the opposite side of where the allen key screw is (the one used to adjust pressure), it may be leaking from the circle bit that goes out when th eon and off is turned on. I found that if u turn the on and off all the way off then apply pressure to the circle bit on the other side, wen turned on it will work. strange huh? nyhoo thats all i got so gd luck!

Demonkilla
04-16-2007, 02:39 AM
That happend to mine, but B4 i got it out of the shop so they fixed it 4 me.
i noticed he put a little water on the gun to see where it was coming from???