PDA

View Full Version : question about trinity body


slimloko
03-11-2007, 07:50 PM
:confused: sup you all im having problems with my trinity sick body
everytime i turn on my tank my vs stars leaking air thru the barrel and feed neck this happens with the trinity body, when I use the stock body its fine
whats the problem? maybe the sick trinity body, or the O-rings, are there different O-ring zises? :confused: :confused:

CAREBARE I NEED YOUR HELP YOU HAVE THE SICK BODY DID U CHANGE YOUR O-RINGS?

DRAGON
03-11-2007, 08:18 PM
Sounds like the tube that houses the valve is too large creating a bypass leak -

slimloko
03-11-2007, 08:39 PM
Different O Rings Will Solve The Problem?

CareBear-Killer
03-11-2007, 10:38 PM
They should... I used the ORings that came with the body & front block. I would give them a shot. Also, make sure everything is lubed up.

Another thing to check... get a good sized wrench and make sure the gauge is on tight. I noticed that Trinity only puts the gauge about 2 threads in to make it easy to change.

Worest case scenario the gauge is bunk like mine was... You may want to take the guage off the original front block and pop it on the trinity block.

king-man
12-26-2007, 03:20 PM
were could i get some of these orings ive gotthe same prob cept mine i have both the body and the front block and i didnt get oring in either of them