PDA

View Full Version : Taco's custom triggers are now for sale!!!!!


Muddytaco
03-06-2007, 07:51 PM
UPDATE 3-26-07:

All material and bearings are spoken for/gone.

Not taking anymore orders unless you can get a group of five people together, otherwise i am just losing money on the cost of the materials.




*Please Note*
-First run is limited to the first 15 orders due to lack of material!!!
-Once there gone I will not be making more till mid-may due to busy college semester!!!
-Triggers are all hand made and take time, you will be given an estimate on shipping date when you order





Pics of completed triggers


New roller bearing trigger:
http://i2.photobucket.com/albums/y41/muddytaco/P3220169.jpg


VS2:
http://i2.photobucket.com/albums/y41/muddytaco/P3120011.jpg

http://i2.photobucket.com/albums/y41/muddytaco/P3120022.jpg


E-frame:
http://i2.photobucket.com/albums/y41/muddytaco/P3120058-fixed.jpg

http://i2.photobucket.com/albums/y41/muddytaco/P3120071-fixed.jpg

http://i2.photobucket.com/albums/y41/muddytaco/P3140084.jpg

http://i2.photobucket.com/albums/y41/muddytaco/P3140079.jpg


MR2:

http://i2.photobucket.com/albums/y41/muddytaco/P3170134.jpg


http://i2.photobucket.com/albums/y41/muddytaco/DSCF0023-3.jpg

Just some ideas, can make these designs or anything you can think of. Just quickly drawn by hand, not in scale.


Thanks to mike I now have a weight for the triggers......only 2 grams!


-VS2 series
Full radius on the face edges of trigger to make it extremely comfortable to walk. Light weight for quick return and higher rates of fire. Includes 3 points of adjustment. pre travel, post travel and switch activation. Stainless Steel set screws included. Step by Step install instructions with pictures also included.

Prices:
-dual ball bearing
-$25 + $5 for Priority Shipping w/ delivery confirmation

-non ball bearing
-now $15 + $5 for Priority Shipping w/ delivery confirmation


-Regular E-frame

Full radius on the face edges of trigger to make it extremely comfortable to walk. Light weight for quick return and higher rates of fire. Includes 1 point of adjustment, pre travel. Post travel and switch activation are not needed. Stainless Steel set screw included. Step by Step install instructions with pictures also included.

Please note what e-frame you have, ESP frames need a shorter cut on the top.


Prices:
-dual ball bearing
-$25 + $5 for Priority Shipping w/ delivery confirmation

-non ball bearing
-Now $15 + $5 for Priority Shipping w/ delivery confirmation




-MR2 series
Full radius on the face edges of trigger to make it extremely comfortable to walk. Light weight for quick return and higher rates of fire. Includes 3 points of adjustment. pre travel, post travel and switch activation. Stainless Steel set screws included. Step by Step install instructions with pictures also included.

Prices:
-dual ball bearing
-$25 + $5 for Priority Shipping w/ delivery confirmation

-non ball bearing
-now $15 + $5 for Priority Shipping w/ delivery confirmation



http://i2.photobucket.com/albums/y41/muddytaco/logo_paypal_verified.gif

Payment through paypal is preferred.


-POST HERE AND I WILL PM YOU!!!! My box fills up to fast if everybody PM's me.
-you can reach me on aim at paintball6684, i am on alot
-Please state the frame style you are ordering for(vs2/e-frame/mr2)
-I will contact you shortly


Triggers left: 8


Order List/your place in line/what spots are left:

1. opteron VS2 / Blade stlye / non ball bearing......Shipped 3-13-07
2. pb34 E-frame / #7/ non ball bearing......Shipped 3-13-07
3. Reaper E-frame / #3/ non ball bearing......Shipped 3-14-07
4.MikeVW VS2 / Blade Style / non ball bearing......shipped 3-19-07
5. Khami VS2 / Blade Style / roller bearing trigger #1......shipped 3-22-07
6. MVS1 E-frame / #7 / roller bearing.......Being made 3-22-07
7. ttam13xlpb E-frame / Dye UL style / non roller bearings......Being made 3-23-07
8.
9.
10.
11.
12.
13.
14.
15.

MR2 Woodsballer
03-06-2007, 08:04 PM
Hey taco could you make one for the MR2 w/ball bearing? If you can we can cut out the shipping and you could just send it with my lil brothers pilot.

Muddytaco
03-06-2007, 08:06 PM
Hey taco could you make one for the MR2 w/ball bearing? If you can we can cut out the shipping and you could just send it with my lil brothers pilot.

sending you a pm

Theheroguy
03-07-2007, 11:01 AM
post in pbn

Ace24
03-07-2007, 11:12 AM
Is it possible for you to make a mechanical trigger? For example for a MR1? Like a single finger trigger?

pb34
03-07-2007, 11:50 AM
Darn I was really looking foward to the scythe. Looks like I'll just have to wait. Free up!

Hob Hayward
03-07-2007, 12:07 PM
Is it possible for you to make a mechanical trigger? For example for a MR1? Like a single finger trigger?

Something like that would be better made out of alum, I'd suspect delrin might be too weak to be repeatedly used on mech frame. Maybe I'm wrong though.

Muddytaco
03-07-2007, 03:20 PM
Something like that would be better made out of alum, I'd suspect delrin might be too weak to be repeatedly used on mech frame. Maybe I'm wrong though.

working on making one with an aluminum insert on the contact point.

DRAGON
03-07-2007, 03:39 PM
working on making one with an aluminum insert on the contact point.

Have you ever looked at a mechanical trigger? There's more than just a contact point. You'll need a seperate metal piece that pivots on a pin and a spring to push it back in place after every shot. Why do you think there are no aftermarket mechanical triggers available? Good luck on that one -

Muddytaco
03-07-2007, 07:03 PM
Have you ever looked at a mechanical trigger? There's more than just a contact point. You'll need a seperate metal piece that pivots on a pin and a spring to push it back in place after every shot. Why do you think there are no aftermarket mechanical triggers available? Good luck on that one -

yes i have looked at one, i have 3 mech spyder frames and 3 mech cocker frames. i will get pics up in a few days, it will work. By contact point i mean any part of the trigger that hits the sear.

MR2 Woodsballer
03-07-2007, 07:05 PM
hey taco did you find out anything about the MR2 triggers?

Muddytaco
03-07-2007, 08:12 PM
hey taco did you find out anything about the MR2 triggers?

yes, found one local, trying to meet up with him.

MR2 Woodsballer
03-07-2007, 08:15 PM
Sweet let me know what you find out. Thanks for checking into it.

Muddytaco
03-09-2007, 06:03 PM
UPDATE:

I have new bearings being shipped to me right now that are hopefully the right size, so if all goes well i will have ball bearing triggers by next weekend ready to sell.

Also going to change from just blade style to any style you choose.

be watching for updates next week sometime.


Still waiting to get with guy on MR2.

Theheroguy
03-10-2007, 06:31 PM
what happened to all those people who said they'd buy these not even one order.... for shame good luck muddy free up

Opteron-O3
03-10-2007, 07:11 PM
So you have 15 made right now for the VS2?

Reaper
03-10-2007, 10:46 PM
Hey you got any two finger triggers? Pics would be great also

pbgrandpa
03-11-2007, 06:22 AM
When you have the MR2 triggers ready I want one(w/ball bearing) So I guess you can consider this an order. If you can't hook up with the other guy I'd be happy to send you mine. LMK

Opteron-O3
03-11-2007, 06:35 AM
I'm really interested... let me know about the VS2 triggers. I have money in Paypal now.

Muddytaco
03-11-2007, 11:09 AM
So you have 15 made right now for the VS2?


I have the possibility to make 15 out of the material i have now, all are made to order.

As of right now you can only order non ball bearing triggers since i don't have the bearings here yet.


Hey you got any two finger triggers? Pics would be great also

Haven't made one yet but i can make anything you want.



When you have the MR2 triggers ready I want one(w/ball bearing) So I guess you can consider this an order. If you can't hook up with the other guy I'd be happy to send you mine. LMK

Still trying to hook up with the local guy, if i can't get with him in a few days I might need just the frame sent.






The new ball bearings (and hopefully the right size this time) should be here earily this week hopefully.

I am making a sheet with a bunch of shapes available for idea purposes, any shape can be altered or even have your own design made. Should have it posted in a little while.

Muddytaco
03-11-2007, 12:03 PM
http://i2.photobucket.com/albums/y41/muddytaco/DSCF0023-3.jpg

Just some ideas, can make these designs or anything you can think of. Just quickly drawn by hand, not in scale.

pb34
03-11-2007, 12:27 PM
I like number 4, when I get a couple extra bucks I'll let you know. It would be 20$ shipped right?

Muddytaco
03-11-2007, 01:05 PM
I like number 4, when I get a couple extra bucks I'll let you know. It would be 20$ shipped right?

yes for non ball bearing, haven't got a price on ball bearing ones yet. Once i see if there the right size i will see if i can get a discount on a bulk order.

pb34
03-12-2007, 12:27 PM
Ok, I changed my mind. I like number 7 and I am ready to buy it. I just want to make sure it will fit on my trigger frame. I have the one where the board has 1 red light and 2 white lights, not sure which board that is. I know certain triggers won't fit on certain frames so I just want to make sure I get the right one. Thanks.

Muddytaco
03-12-2007, 02:25 PM
Ok, I changed my mind. I like number 7 and I am ready to buy it. I just want to make sure it will fit on my trigger frame. I have the one where the board has 1 red light and 2 white lights, not sure which board that is. I know certain triggers won't fit on certain frames so I just want to make sure I get the right one. Thanks.

I am 99% it will fit, if it won't fit when you get it just send it back and I will send a refund.

pb34
03-12-2007, 03:28 PM
Alright, I just pm'ed you not realizing you asked for people not to pm you. Sorry about that.

Muddytaco
03-12-2007, 03:47 PM
Alright, I just pm'ed you not realizing you asked for people not to pm you. Sorry about that.

Sent you one back, don't worry about it.

Theheroguy
03-12-2007, 06:55 PM
considering #3 vs2 w/bearings how much again?

edit gonna get it but won't have money until friday

Muddytaco
03-12-2007, 07:17 PM
considering #3 vs2 w/bearings how much again?

edit gonna get it but won't have money until friday


Bearings will be $10 more due to bearing cost, I got top of the line bearings. So $25 + $5 for priority shipping

bellez77
03-13-2007, 03:03 PM
looking at a #7 w/ ball bearings, but i dont have money as of now, I'm not sure what frame i have. I believe it is a fenix.

Muddytaco
03-13-2007, 03:20 PM
looking at a #7 w/ ball bearings, but i dont have money as of now, I'm not sure what frame i have. I believe it is a fenix.

that would be the e-frame triggers. I will probably have the ball bearing triggers for sale in a few days.

pb34
03-16-2007, 02:01 PM
Free up for ya.

Muddytaco
03-16-2007, 02:59 PM
thanks for the up.


Still waiting for bearing to be delivered:mad:

wylde01
03-16-2007, 03:05 PM
have you heard anything from the guy with the mr2 yet?

Muddytaco
03-16-2007, 03:17 PM
Forgot to say something about that, got a mr2 frame in front of me right now. Starting on it later on today.

wylde01
03-16-2007, 03:29 PM
ok. let me know when you finish.

MR2 Woodsballer
03-16-2007, 07:36 PM
Sweet Taco hope you can get something up on the MR2 soon. Thanks for checking into it for me.

Muddytaco
03-16-2007, 07:39 PM
I started working on it but lost power in the garage for some reason, I will get back on it tomorrow.

Opteron-O3
03-16-2007, 08:00 PM
UP for the sexiest triggers out there.

Muddytaco
03-17-2007, 12:54 PM
I can make non bearing MR2 triggers now.

pics here of one i made today:
http://www.spyder.tv/forums/showthread.php?p=121343#post121343


Hoping the bearings will show up today sometime, still pissed though since i ordered them last friday with priority shipping and there still not here.

MR2 Woodsballer
03-17-2007, 01:13 PM
Awsome!!

Muddytaco
03-18-2007, 12:42 PM
cleaned up and updated first post.

Khami
03-20-2007, 11:05 AM
Hey Muddy,

I happen to run into opteron on the pbnation spyder section with your trigger. And i wanted one so i decided to make an account here (user name the same on the nation). Let me know what type of payment you will take, i need the VS2 Blade style one (unles you have other ones i can look at.)

Muddytaco
03-20-2007, 02:24 PM
UPDATE:

THE ROLLER BEARINGS ARE HERE!!!!!!!!!!!!

Tolerance is so close they won't fit on all the way. holding 400 grit sand paper and turning the pin twice made for a perfect fit.

Bearing triggers will include a small section of 400 grit sand paper to have the perfect fit on the trigger pin.

Now taking orders for Roller bearing triggers!!!!!!!!

You must buy now if you want roller bearings as i am ordering more bearings based off how many i need.

MikeVW
03-21-2007, 05:29 PM
Hey Muddy,

I happen to run into opteron on the pbnation spyder section with your trigger. And i wanted one so i decided to make an account here (user name the same on the nation). Let me know what type of payment you will take, i need the VS2 Blade style one (unles you have other ones i can look at.)


Ha, I had to do the same thing! Received mine today, looks sweet! "Cause sometimes you just need a real Taco!"

MVS1
03-21-2007, 07:03 PM
Sending ya the money now via paypal, #7, roller bearing for my pilot. Now all you need is a "Taco's customs" bubble, I've got some advertising space on the right-hand side of my frame open :D.

Muddytaco
03-21-2007, 07:06 PM
Sending ya the money now via paypal, #7, roller bearing for my pilot. Now all you need is a "Taco's customs" bubble, I've got some advertising space of the right-hand side of my frame open :D.

lol i should look into that. I am adding you to the list.

ttam13xlpb
03-22-2007, 07:08 AM
can you make a dye ul trigger w/o bearings for my pilot???

Muddytaco
03-22-2007, 12:08 PM
can you make a dye ul trigger w/o bearings for my pilot???


sure can, I have a ul trigger so it would be super easy to copy, lmk for sure.

Muddytaco
03-22-2007, 01:40 PM
Put one up on first page but here is the rest of the Roller bearing pics:
http://i2.photobucket.com/albums/y41/muddytaco/P3220168.jpg

http://i2.photobucket.com/albums/y41/muddytaco/P3220169.jpg

http://i2.photobucket.com/albums/y41/muddytaco/P3220171.jpg

http://i2.photobucket.com/albums/y41/muddytaco/P3220170.jpg

http://i2.photobucket.com/albums/y41/muddytaco/P3220172.jpg

Muddytaco
03-25-2007, 04:17 PM
Newest one, the spyder UL trigger:

http://i2.photobucket.com/albums/y41/muddytaco/P3250174.jpg

http://i2.photobucket.com/albums/y41/muddytaco/P3250175.jpg

Still needs to be cleaned up alittle.

Muddytaco
03-26-2007, 05:38 PM
UPDATE 3-26-07:

All material and bearings are spoken for/gone.

Not taking anymore orders unless you can get a group of five people together, otherwise i am just losing money on the cost of the materials.

pb34
04-11-2007, 01:25 PM
I know it says you are only taking orders of five, is there any way you could take an order of three since I already bought one. I need 2 e-frame ones and one mech one. All in the number 7 shape. Let me know.

KillerPanther
07-03-2007, 11:46 PM
Are there any vs2 triggers left

KillerPanther
07-03-2007, 11:51 PM
replying to my own reply is there five people that wan the yet

sorry, about posting asking for one

Muddytaco
07-04-2007, 09:39 AM
I have had 3-4 people ask about them so I will be ordering more material in a week or two to start making them again.

Opteron-O3
07-04-2007, 11:00 AM
I have had 3-4 people ask about them so I will be ordering more material in a week or two to start making them again.

I would be interested in buying another one myself :thumbup:

VS3 Sniper
07-04-2007, 11:20 AM
Hey david I think I might be interested in one or two lmk when u get things back up and running.

Charfizcool
07-04-2007, 12:59 PM
ya I'd buy one too.

KillerPanther
07-04-2007, 05:07 PM
ok, please post when your ready to have a sale, thanks