PDA

View Full Version : Ahhhh I Need Help


slimloko
02-26-2007, 06:53 PM
:( I NEED HELP I JUST GOT A ''CP'' ON/OFF BOTTOMLINE FOR MY VS3
I WAS TESTING TO SEE IF IT WOULD WORK
BUT WHEN I HOOK AND TURN ON THE TANK ALOT AIR CAME OUT FROM
THE FEED NECK THEN IT STOP, AND THEN WHEN I COCK MY VS AND I
TRY TO SHOOT IT SOUNDS VERRRRRRY LOUD I MEAN LOUD AND MY GUN GOT
KINDA COLD AND MY FRONT BLOCK GAUGE IS DEATH
WHAT IS WROOOOONG
ITS BECAUSE OF THE ''CP'' ON/OFF
OR MY TANK OR MY V/A OR WHAAAAT
MY THANK IS JAVA 68/4500psi

PLEASE HELP ME OUT:( :( :( :( :( :(

vwjimmy
02-26-2007, 07:20 PM
The origonal ASA is also the regulator....
Did you put a vertical reg on it? If not, 850psi went straight into the marker!
...that would definately pop the gauge...put the reg back on and see if anything else is leaking and if it works ok....

slimloko
02-26-2007, 07:31 PM
Mr Jimmy No Its Not Leaking
But Is Verry Loud When I Shoot
No My Vertical REG Is The Stock One
But Why Is Very Loud
I Need A New Vertical REG?

vwjimmy
02-26-2007, 07:35 PM
No, the foregrip is just that, a GRIP...
The regis in the ASA that came with the marker, you replaced it with the CP on/off right? If you didnt put a reg somewhere else, your marker dosent have one now!
Take that on/off OFF and put the bottomline reg back on!

slimloko
02-26-2007, 07:45 PM
OOOHHH MY VS DOSNT HAVE A REG NOW IS THAT WHY IS SO LOUD
I NEED TO GET A REG NOW, ANY RECOMMENDATION Mr JIMMY
THANKS ALOT Mr JIMMY I DONT HAVE THE STOCK ON/OFF IT BROKE

vwjimmy
02-26-2007, 07:50 PM
First, take that on/off off and put the old one back on. Second, make sure the marker is ok. Third get a new gauge. Fourth, start shopping for a new front block (v/a) and a vertical regulator....Lastly, DO NOT OPERATE THE MARKER WITHOUT A REG AGAIN....
Good luck man!

linkman_11
02-26-2007, 09:01 PM
Caps lock on or something?

slimloko
02-26-2007, 09:06 PM
No Link I Just Mess Up I Forgot The Reg Mr Jimmy Got It Right
Im Geting A Trinity Front Block And A Reg Fom "cp"

CareBear-Killer
02-26-2007, 09:11 PM
No Link I Just Mess Up I Forgot The Reg Mr Jimmy Got It Right
Im Geting A Trinity Front Block And A Reg Fom "cp"

Now that's the spirit! hehe :)


that new front block will also take care of the blown guage problem as well. Also the guage is a high pressure guage so I would recomend replacing it sometime with a lower-pressure guage.

slimloko
02-26-2007, 09:27 PM
Carebear Question For You ''cp'' Barrel Will It Fits On The Stock Vs Body If Not How Can I Make It Fit Thanks
DAMMM I LKE YOUR VS HEY U NEED TO GET THE BLUE TRINITY GRIP THATS GOING TO MAKE YOUR VS VERY SEXY LOL

Opteron-O3
02-27-2007, 08:06 AM
you do realise that VS already came with a regulator correct? That's whay Jimmy was telling you the whole time...

Oscum Guy
02-27-2007, 12:43 PM
you need a reg man.

CareBear-Killer
02-27-2007, 09:38 PM
Carebear Question For You ''cp'' Barrel Will It Fits On The Stock Vs Body If Not How Can I Make It Fit Thanks
DAMMM I LKE YOUR VS HEY U NEED TO GET THE BLUE TRINITY GRIP THATS GOING TO MAKE YOUR VS VERY SEXY LOL


Thanks again man. I just bought a freak barrel... hehe. the grips are the prolly the last thing I'll upgrade.

As far as the barrel goes... The stock VS3 body has some body work that hangs over the top of the barrel. (take a close look at the front of the marker; where the marker meets the barrel in any stock pics of the VS3) This body work hangs down a little and only slim barrels will fit, such as a stock barrel or a J&J. The VS2 does not suffer from this problem.

slimloko
02-28-2007, 05:57 PM
ok thanks hey have you seen the picture where they mod the front to fit any barrel would that help is that hard to do. another thing hey I just realized, I order the trinity font block but i dont think is going to fit
dammm it now wut
ahhhh im so angry idont think is going to fit
yours fit because of the trinity body kit is that right?

Hob Hayward
02-28-2007, 06:28 PM
It should fit. It was designed to at any rate, assuming you got the VS one and not the classic spyder one.

CareBear-Killer
02-28-2007, 07:38 PM
So long as you ordered the VS front block, it will fit and work just fine. The Trinity body is just another optional upgrade.

slimloko
03-01-2007, 08:45 PM
NOOOO, FRONT BLOCK IS NOT FITTING ON MY VS I THINK THEY SEND MY
THE WRONG ONE THIS ONE IS FOR THE CLASIC SPYDER NO THE VS3:mad:

CareBear-Killer
03-01-2007, 09:20 PM
call Trinity then and see what their return policy is.


Worst case scenario, you can sell it to someone on here in the buy/sell/trade section or you can sell it on ebay.

slimloko
03-01-2007, 09:27 PM
Yea I Just E-mail Them And I Will Call Them Tomrrow