PDA

View Full Version : Imagine probs


cr1mson
01-20-2006, 03:20 PM
I have a Spyder Imagine, Kingman ACS bolt, and nothing else aftermarket. It has worked great the few times I have used it. Today, it started burping. The bolt would not recock, and it began to double feed. I use CO2 and it was almost 60 degrees. The velocity decreased greatly also. Anyone have any thoughts?

ShadowX
01-20-2006, 03:32 PM
lube up your stiker o-ring and also clean the gun really good and get all paint/debris out, that should fix your burping and not recocking problem.

as for the double feeding it may be a bad ball detent, check them, take the detent off and see if it still is nice and springy and returns correctly, without sticking.

ad0131065
01-20-2006, 03:35 PM
is your tank full?

cr1mson
01-20-2006, 05:03 PM
My tank was full. I also tried at least three other tanks that were all full and unused. I had the tanks filled the night before, so they weren't too cold either.