PDA

View Full Version : help on lubing


spitfirocks
02-13-2007, 07:08 PM
hey, i just got my pilot about 2 weeks ago, my setup is a 50/3000 tank, and i got an egg 3..What is the situation on lubricating the gun?And what do i have 2 do ? I have never lubricated the gun yet, and ive been paintballing twice, so am i supposed 2 lubricate it, and if i am, where?

Backmanshooter
02-14-2007, 03:07 AM
Lube all orings.

Bolt,striker,valve. Its very easy. ;)

Sandman_Bravo
02-14-2007, 03:28 AM
here are some tutorial videos:

http://www.kingman.com/section/support/videos/videos.html

All Spyders are basically the same internally so it applies. Get some marker oil or lube if you like. Also read Otter's site:

http://www.ottersccustoms.com/index.html

Get educated on how your marker works and how it is put together; & clean/lube after each day of play. Good luck.

ooglieboogliebob
02-14-2007, 04:56 PM
It's good to do all of that after each game of play, but if you just don't have the time you can always just put a few drops of oil inside the ASA (where you screw your tank into), then shoot it a dozen times without the barrel or hopper on.

Spinal
02-15-2007, 10:11 AM
Lube all orings.

Bolt,striker,valve. Its very easy. ;)
well actually if he got his pilot 2 weeks ago im assuming its the ACS version, which the bolt has no o-rings and does not need to be lubed.

Hossy
02-15-2007, 10:18 AM
well actually if he got his pilot 2 weeks ago im assuming its the ACS version, which the bolt has no o-rings and does not need to be lubed.
there should still be orings on the sriker, and some other places. do what oogliebooglibob said, and youll be fine