PDA

View Full Version : Valve Question


pb34
02-02-2007, 02:40 PM
Ok, so I'm thinking about buying a NDZ HP Valve. I was wondering if this valve will work with high pressure as well as lp?

Halucin8
02-02-2007, 02:47 PM
yes it will work but you definitely need a spring kit or you will be shooting over 300 fps. the valve will give you a large amount of flow and if you do not turn your pressures down or change the valve dwell to be shorter it will be a huge gas hog and shoot hot.

pb34
02-02-2007, 02:50 PM
Yea im getting a spring kit too.

Backmanshooter
02-03-2007, 06:45 PM
It should be fine, then.

Hoppy11
02-03-2007, 07:15 PM
It will be fine, but you will have to do some tweaking and playing around with different springs and combinations. Im sure someone here could just tell you what springs to use, but I am not that guy, lol. Sorry.

Halucin8
02-04-2007, 06:41 PM
noone will be able to tell him which springs to use. just sme starting points because every marker is a little different efficiency wise wow big words are hard to spell. but you may need to go to a light main and leave the valve alone. if that doesnt' work go to the hard valve and stock spring . both set ups will shorten the time the valve is open. but the light spring will reduce some of the "kick" of themarker.

Sandman_Bravo
02-05-2007, 01:39 AM
You're on the path to LP young padawan. Use the LP force...PB34.