PDA

View Full Version : plz help me my mr1 stopped working


heffy
01-31-2007, 12:31 PM
plx help me i played a game with my new mr1 and it chopped so i cleaned it out and tried again, it still chopped so i put a new spring in it and then the balls wouldnt come out, so i put the old one back in and they still will not come out so plz help me

Hossy
01-31-2007, 12:35 PM
can you please explain by, come out...
as if they were being shot?

If so, did you run out of air? or you put something in backwards, probably the striker or striker buffer

heffy
01-31-2007, 12:40 PM
like i could see the hammer move and hear it pop, full air tank, but when the trigger got pulled the hammer moved and nothing happend

Hossy
01-31-2007, 01:41 PM
im pretty sure its the striker buffer....
Take the gun appart, and make sure the little black rubber washer comes in after the striker

heffy
01-31-2007, 02:01 PM
i cant find a buffer and i dont ever remember one being there

DRAGON
01-31-2007, 02:12 PM
Bolt upside down -

heffy
01-31-2007, 02:50 PM
no still nothing

Hob Hayward
01-31-2007, 03:41 PM
Take the valve out, make sure the buffer isn't wedged up against it because thats really what it sounds like.

Will it recock?

Try to give us the most specific explanation of whats happening so that we can better diagnose the problem.

heffy
01-31-2007, 04:24 PM
yeah it recocks but no painballs shoot out, so it recocks the hammer moves forword but for some reason no paintballs shoot out the gun

DRAGON
01-31-2007, 05:37 PM
I already told you what's wrong. Sounds like you don't know which way is up on the bolt -

heffy
01-31-2007, 06:45 PM
no the bolts the right way up

alam3503
02-02-2007, 03:00 PM
try stripping it and checking with the diagram to see if you are missing anything....and you said that you can hear the CO2 pop when you pull the trigger????

heffy
02-04-2007, 08:07 AM
oh i fixed it, it seems the bolt was upside down thanks for helping me fix it guys

Ace24
02-04-2007, 09:11 PM
:dodgy:

Quick lesson on the MR1 stock bolt. Look for that little groove in the front. That is your detent grove. If that is facing the left side of the gun (if your behind the gun) you have the bolt upside down. Always make sure that you place the bolt inside so that the detent side is to the right.