PDA

View Full Version : Front Block Loose?


sspp
01-29-2007, 06:01 AM
Is it just me or does the front block seem to move a little too much (side-to-side, not in-out). I can live with it, but was wondering if it's normal. It is a bone stock VS2.

ooglieboogliebob
01-29-2007, 08:43 AM
Well even if it moves side to side, once you air it up that problem should go away quickly. Try moving it side to side once it's aired up ;)

TXTeague
01-29-2007, 10:59 AM
Take a look here, specifically #5. http://www.spyder.tv/forums/showthread.php?t=7636

kenangelamuna
01-29-2007, 02:03 PM
just remove the washer under the screw and reinstall the screw...This will solve that problem. This is a common prob on all VS series

sspp
01-31-2007, 07:33 PM
Thanks for the replies. I guess I'll try removing the washer.

Hob Hayward
02-01-2007, 01:33 PM
If you remove the washer you might have the problem of the screw coming loose as you play. The star washer is designed to keep the screw from wiggling its way out as it gets vibrated by the gun firing.

As ooglieboogliebob said, once you air it up, it should stop wiggling- the air pressure keeps it from moving around.