Virtue Board issues.... =(

[thechubbss12]

Alright guys.... Everyoen knows my NME.... Well i sent the Virtue board in they sent me back a Brand new one...

Well i finaly get everything installed... and well now im haveing speed issues with the board.... When the Eyes are on it shoots 1/2 the speed of when they are off (EX set it for PSP and it will shoot 8BPS with the eyes on... and normal speed with them off....)... So yea i recently repaired the eyes and they read weither the ball is in the chamber or not perfectly... but it just refuses to shoot over 8BPS?....

Any help would be apprieciated.... =)

[spyderaron]

You should send it back. Ask for another one or for your money back.

[*EM1-Master*]

Sidenote, I like that we can actually say Virtue here :p Stupid PbN

[Muddytaco]

If you know your eyes work, it sounds like a board problem. Have you checked the connection on the board for good contact?

[MVS1]

Does the Virtue board have adjustable eye logic and eye delay? I'm not real familiar with the Virtue boards, always went with the t-board. I'm guessing you probably already tried these but maybe something didn't take while you were programming. Probably no help, but you never know.

[bigred76]

What is your ROF set to? :nododgy: Up that all the way, then check again... ;)

[thechubbss12]

Bahh... i had the same issue with the last board.... Except the on the last board some of the LEDs were out LOL....

Yes the ROF was on 20 and now its on 15... still same 8 BPS.....
Dwell is on 6MS... i raised 8MS and then finaly 15MS... but well that made little diffrence.....
Also Adjusted the Eye sensitivity.... from 1 to 3 to 5 and still no change....

[Nenkitsune]

i'd get your money back and get a diffrent board....
This forum requires that you wait 45 seconds between posts. Please try again in 2 seconds. :smashpc: