PDA

View Full Version : ?


killerpinecone
01-13-2007, 07:01 PM
http://www.pbnation.com/showthread.php?t=1622592

will a dual timmy block work on a spyder???

Halucin8
01-13-2007, 07:08 PM
I would assume no since a timmy is a elcetro-pnuematic marker and the lpr attaches to the front block and i believe it is ported for this instead of a lpc which is just an empty jar holding air in reserve.

shunut
01-13-2007, 07:12 PM
:yeahthat:

It will fit but it won't work with a Spyder because of the difference between LPRs and Expansion chambers.

08Lud08
01-13-2007, 08:30 PM
:yeahthat:

It will fit but it won't work with a Spyder because of the difference between LPRs and Expansion chambers.
like he said but I bet if you emptied out the lpr and found a way to close the place where the barb is it could work.

El Duche
01-13-2007, 09:13 PM
^You could weld it but it prolly wouldn't be pretty. It would have to be done by somebody who knows what they are doing to take the 850 or so PSI the marker operates at.

you could but the way it is designed there is a hole in one of the tubes to channel air to a barb that then brings the air through a hose into the solenoid. If you were to have a plug made that would fit in there it would work. but just as a screw it on and go mod it will not work.