PDA

View Full Version : regulator question


hkyhead13
01-09-2007, 06:14 PM
Will the stock vs2 veritcal adapter with lpc fit on a pilot acs and can you put regs on it?

vwjimmy
01-09-2007, 06:18 PM
You will need a new V/A...
your Pilot has a V/A that is not ASA threaded...

hkyhead13
01-09-2007, 06:23 PM
any suggestions then?

pb34
01-09-2007, 08:06 PM
I believe there are only two out that work on regular spyders. The two are:

Check-it 15* Assault Block: http://www.firstcallpaintball.com/pages-productinfo/product-1755/check-it-check-it-assautlt-block.html?zenid=24cf0522fb2f7e528f0f7d13e8091416
and
Trinty -7* Front Block: http://www.actionvillage.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/DisplayProductInformation-Start;sid=sC_0E4IHjwD0scej1VA0u4ihou39D1tN-Gc=?ProductID=z3jAqArbME0AAAEAi5Shw5qH

Either of them would work.

hkyhead13
01-09-2007, 08:22 PM
ok thanks for that do you know about the fenix?

MVS1
01-10-2007, 07:29 AM
The Fenix va and reg will work, however it has a slight forward angle so if you want a back angle the trinity va (front block) would be your best bet. Also the Fenix stock reg is ok but not the greatest in regards to flow and recovery. If you can get your hands on it cheap, say 10-20 bucks then it might be worth going that route, but you'll most likely end up upgrading later on down the road. If you get the trinity/15* Assault Block you can choose from a wide range of different reg's which will out perform the stock Fenix. All a matter of how much you want to spend.

hkyhead13
01-13-2007, 03:20 PM
new question up


~*Upping non-sales threads is not allowed on this site. Please do not do this again*~jjr

STRIKEFIRST
01-14-2007, 08:09 AM
The vs2 v/a is threaded different...and it doesn't take standard regulators.

You can find a used assault or trinity for around 25 bucks...or check out sales corner chubbz has a fenix block and regulator for sale dirt cheap.

fwgericke
01-14-2007, 09:04 AM
ive got a question. will your stock expansion chamber fit onto that trinity front block you recommended??

Halucin8
01-14-2007, 10:43 AM
no the stock expansion chamber does not have any threads so if you go with the trinity or assault block you will need a new one of those if you do not go with a regulator

hkyhead13
01-14-2007, 03:13 PM
will an aftermarket reg fit on a fenix stock va