PDA

View Full Version : Low Pressure


bracer028
01-08-2007, 11:58 AM
what pressure do you guys operate at?

what combination springs do you guys use?

invisibledrummer
01-08-2007, 07:40 PM
what pressure do you guys operate at?
with stock marker/springs, i can get my gun down to 350 psi without recocking issues but the fps will probably be pretty low (havent chronoed at that pressure). right now i have my Electra set to 500 psi and i got it chronoed at 260. (the limit at my field is 280) with some extra tinkering and a spring kit, which i plan on getting really soon, i could probably mess around with it and possibly get it down to 350 psi with an fps of around 250 or higher. (might need to get a higher flowing valve and better bolt to get the velocity up higher, but im not sure)

what combination springs do you guys use?
This is going to vary from marker to marker and based on air efficiency and internals ...etc blah blah. but for a lower pressure you could try starting with a medium main and medium valve or a weak main and medium valve. it all depends.
Do you have a spring kit right now, becaus if not, i would recommend the 32 degrees 9 piece spring kit.

Drummer