PDA

View Full Version : Need help reversing bottle


BOOstGhost
12-27-2006, 05:09 PM
I want to reverse my bottle set up like specialopspaintball does for their A5 dagger kit. I know I need to buy a CP ASA and Pro Rail, but what else do I need to buy? How would I got about the lines and fittings? Any ideas? Thanks guys.
-adam-

druid
12-27-2006, 06:11 PM
All you are doing is turning the asa around to stick out the front of the marker. If everything fits in it's stock condition, then everything should fit when reversed.

The CP asa is standard threaded but your Spyder line is Metric and thus, so is the mounting hole in the VA.

Put this fitting into the CP ASA..http://www.actionvillage.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/DisplayProductInformation-Start;sid=4xb3nCM-l4L3iGatxzk3NCn3RlZCQFRFnIw=?ProductID=qnqsFAY7%2e CoAAAD4w6zkrFs5
and get a standard threaded line...screw it into the above fitting...

and put this in the VA...http://www.actionvillage.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/DisplayProductInformation-Start;sid=4xb3nCM-l4L3iGatxzk3NCn3RlZCQFRFnIw=?ProductID=6XmsFAY74Qg AAAD3VeOlA_2s unless it's a 90* elbow, in which case yer outta luck.

If that's the case, you need 1 metric threaded 90* macroline fitting, 1 90* standard threaded macroline fitting and a section of macroline. The Metric goes in the VA, the standard goes into the asa.

BOOstGhost
12-28-2006, 06:21 PM
thanks for the help :D

BOOstGhost
01-10-2007, 09:11 PM
I finally got my CP ASA adapter and it doesn't fit on the stock drop forward. Did anyone else have this problem.

BOOstGhost
01-13-2007, 09:18 PM
I finally got my CP ASA adapter and it doesn't fit on the stock drop forward. Did anyone else have this problem.
Finished
http://i129.photobucket.com/albums/p240/ThePhantomMenace/Paintball001a.jpg