View Full Version : my VS3 is leaking plz help
12-27-2006, 03:58 PM
i just got my new VS3 and i screwed my tank on to it and i can hear a leak coming from what i think is the regulator. i have tried 2 different tanks on the gun and i get the same leak. does anyone know how i can fix this?
12-27-2006, 05:32 PM
Put a new o-ring on the tank, and teflon tape the macro fitting the connects to the reg, and check to make sure the macro is in tight, and if all else fails call kingman cuz its under warranty.
12-27-2006, 09:45 PM
ok thanks il give it a try.
12-28-2006, 12:27 AM
Put a couple drops of oil into the ASA too. Might just need a tad of a lube.
12-28-2006, 09:47 AM
Turn the dial completely off. Then turn it the other way just a tad(probably a 1/4th turn) Then screw tank in, cock gun, and turn dial all the way on.
01-02-2007, 02:48 PM
I also had a problem like this with my vs3 when i first got it. I found that there is a set screw on the top of the regulator that is a 1.5 allan. You need to take out your battery and board and remove your regulator to access it. Once done I removed the screw and put jb weld on it. Never leaked again.