View Full Version : Dragun problems

12-17-2006, 06:03 PM
I have a dragon marker(spyder clone) that works great for like 2-3 games then it sputters like it is out of air. I can take it apart wipe it down and re oil it and it will work for a few games and do it again. I have completely disassebled it soaked the body in hot water wiped it out let it dry and reoiled and put everything back together and the problem keeps coming back. anyone have any ideas

edit-- the bolt is aluminum and rear cocking seems to slide freely.

12-17-2006, 06:35 PM
Sounds to me like it might be sear wear. OR, it could be that your frame is working itself loose - you might try tightening the screws to see if it'll tighten up a little.

Are you using Co2 or HPA? Another thing, try relubing the regulator - Dragun regs get kinda finicky after awhile.

12-18-2006, 12:48 PM
no regulator
will check screws
thanks for the help

12-18-2006, 04:23 PM
Wait what kind of Dragun is it?

12-18-2006, 04:36 PM
i got it used but has a bubble sticker on it that says dragon fire. older electronic 13 bps semi only board. gas through and vertical feed.