View Full Version : upgrades
12-09-2006, 02:51 PM
hi ive recently researched some upgrades for the spyder pilot im going to get and i would like to hear everyones opinion and if it will fit on the gun or if there is something better to get. even though its gonna be over a hundred bucks and some people will say its not worth it i wont be putting all this stuff on at once. it will be a couple of months before its complete. if i had the cash i would have just got a ion or something. im doing this little by little.
blue spyder pilot acs
dye sticky grips
j and j 14 inch barrel
evo 2 hopper
allen paintball products hittman delrin bolt
warrior paintball spyder clamping feed neck
scenario dreams spyder verc t board with break beam eyes
swiching over to compressed air
12-09-2006, 02:59 PM
Sounds pretty good to me.
12-09-2006, 03:40 PM
thanx. how many shots would i get off a 47ci 3000psi compressed air tank? and what is a good brand to buy my tank from? i really dont know any thing when it comes too compressed air. is n2 and compressed air the same thing?
12-09-2006, 03:59 PM
The tank is the most expensive part, a 47/300 will only get you around 500 shots...
I'd not get the APP bolt, and get an alamo city PB delrin bolt instead, APP is not a reputable part maker for spyder. Leastways, I never knew they even made spyder bolts at all. Also, I dunno much about that Warrior clamping feedneck, I'd stick with the known companies like the NDZ clamping or the CCM leverlock.
As to the hopper, you might want to consider the Spyder Fasta loader when it comes out (supposed to be within a week from now).
12-09-2006, 11:41 PM
Here's a general FAQ thread about HPA and such. (http://www.pbnation.com/showthread.php?t=463535) I'd say 500-750 shots per 48/3k or so. Good brands are PMI, Air America, CP, Crossy, Guerilla Air, and many others. Look at the regulator test page in the link I gave, as well as the weights page. Yes, N2 = HPA.
12-12-2006, 05:28 AM
very nice make sure you have a place close by to refill your tank:D
12-12-2006, 03:11 PM
id get a dif feed neck, ive heard bad things about the warrior ones i liked my t-lock by trinity, and CP ones are very good also
Hold off on getting the break-beam eyes...They can be added anytime after you get the T-board and you might want to see how your ACS bolt does once its broken in. I tend to turn off my eyes quite a bit and let the bolt do the work, and considering how much work went into moding the marker for the eyes if I had it to do over again I'd probably pass on installing them.
12-14-2006, 05:56 PM
yeah i was thinking about not getting them seemed like too much work:p i didnt know whether to add to this one or to start a new thread. anyways instead of the warrior feedneck im getting a lapco clamping spyder feed neck with no holes and a shocktech superfly top coking bolt. are these better or worse than what i oringinally had? and will they fit?
12-20-2006, 05:19 PM
yeah... the new feedneck will serve u much better
and correct me if im wrong, but its probably better to get one with holes, untill u advance to hp...
shouldnt be to big a deal though
12-20-2006, 06:04 PM
yeah i wasnt too checked out on the warrior feedneck either. oh btw a lapco feedneck with holes wont fit the pilot. i dont know why but it said that on actionvillage. this is with holes "This version has holes and fits the E-99, E-99 Avant, Victor, Victor 2, Electra, Electra DX, Old style Imagine, Exprit, Agressor, Agressor XT, AMG, and any others with similiar mounting."
without holes "This version has tabs, not holes and will fit the Pilot, Fenix, Nexion, Rodeo, XTra, Fenix ACS, Primal, Pilot ACS, Electra, TL-R, Sonix, New style Imagine, TL-X, Flash, Flash Classic, EM1, New style Electra ACS (Rockin Frame), New style Pilot ACS, and any others with similiar mounting.''