PDA

View Full Version : Help with HP tank please


front4deuce
11-23-2006, 06:26 AM
I use a '05 Spyder Pilot ACS, and I'm getting an eggy 3. Now the problem is, my CO2 tank has been acting weird. So I decided to look into a HP tank. I have decided on the Crossfire, because it is cheap and reliable. But, do I get a high or low pressure tank? Also, I'm getting a clamping feedneck. Do I get holes or no holes?

Hossy
11-23-2006, 06:46 AM
you get no holes.
and you want a high pressure tank
Pure Energy sells some cheap ones, but there made out of aluminum, not carbonfiber. you may want to check the B/S/T section, used ones are good too, and cheaper

Oscum Guy
11-24-2006, 09:17 AM
i bought a pure energey 48/3000 tank and it works just fine for me. and no holes.

tater_salad
11-26-2006, 07:42 PM
I would go with a Crossfire 48/3000 I got mine on here for $50.00 and love it.

druid
11-28-2006, 08:57 PM
I use a '05 Spyder Pilot ACS, and I'm getting an eggy 3. Now the problem is, my CO2 tank has been acting weird. So I decided to look into a HP tank. I have decided on the Crossfire, because it is cheap and reliable. But, do I get a high or low pressure tank? Also, I'm getting a clamping feedneck. Do I get holes or no holes?

tanks...my sig...click the link..

.

Muddytaco
11-28-2006, 09:11 PM
You want high pressure for any thing other then an angel. What size are you getting?

druid
11-28-2006, 09:16 PM
Yes...get the High Pressure or High Output tanks...and remember the "ci standard"...

3000psi=~10 shots per ci (47/3000=~470 shots per fill)
4500psi=~15 shots per ci (68/4500=~1020 shots per fill)

These are rough estimates and may vary slightly according to your particular marker.

Rapture333
02-22-2007, 05:33 PM
you get no holes.
and you want a high pressure tank
Pure Energy sells some cheap ones, but there made out of aluminum, not carbonfiber. you may want to check the B/S/T section, used ones are good too, and cheaper

Im pretty sure PMI sells good carbon fiber ones

XxPaintballxX
02-23-2007, 05:01 PM
y high pressure?

druid
02-24-2007, 12:50 AM
y high pressure?

Because that's what a stock Spyder needs.

Well, you can always get a Low Pressure tank, get it filled, install it and get pissed because it's not working for you and try to blame it on the marker when it's not the case (and we will remind you of that later on)...then go through the trouble of trying to return it, trade it or sell it...which will take forever and you may end up losing money on the deal...and what you should have done was listen to us in the first place...[/sarcasm]

Stock Spyders need HP tanks...end of story.

XxPaintballxX
02-24-2007, 08:58 AM
the first line could have sufficed...no need for the sarcasm......

druid
02-24-2007, 09:43 AM
Just making sure you understood :)