PDA

View Full Version : leaking


Tonee
01-13-2006, 04:26 AM
is coming from where I screw my bottle to my gun...

will this be the bottles O ring that is causing it? (it looks ok?):confused:

bamf-hacker
01-13-2006, 05:53 AM
looks can be deceiving. Take it off and closely inspect it. Or just replace it with new one. Tank o-rings are super cheap.

Also is it coming from the side with the bottle or the side with the steel braided hose? If it is the latter it could be the fitting seal. Take it apart and re-Teflon it, make sure not to get the tape on the inside of the threads.

HacKeR

ooglieboogliebob
01-15-2006, 12:11 AM
i'd just replace it ... the o-ring usually starts to change colors when it starts to go bad .. i usually replace it before that. It could also always be the hose as hacker said. If you don't have teflon you can use blue loctite. Teflon's cheaper ... like 3 bucks for 5 rolls or so