PDA

View Full Version : which barrel...fits?


QuiGonKen
11-14-2006, 11:35 PM
i know my progressive doesnt fit the mr2 b/c of the shroud are there any other barrels that dont fit?...or should i ask...which barrels do fit?

sensay
11-15-2006, 06:37 AM
they all fit if you take the shroud off.
I have JnJ and it fit fine with the shroud but i took it off anyways.
My mr2 now has an auto cocker esk look, and i like it.

MDC
11-15-2006, 08:43 AM
With the shroud on, Here are some barrels that I have found interesting. The Mil-Sim Barrels can also be purchased w/o the Apex for about $50 cheaper. I'm also a little unsure about the new Recon barrel from Trinity with the suppressor. But if I find out it works, than it may be more of a use for me than my J&J. Shrouds are also available to increase the Mil-Sim look.

http://www.actionvillage.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/DisplayProductInformation-Start;sid=eg5Z6_fqRhFZL7KxOtqZQ_1MciOcInZbeds=?Pro ductID=W4KsFAY7xQkAAAD3RCelA_2t#
http://www.anythingxtreme.com/Trinity-Recon-Barrel-w-Suppressor-P17922C905.aspx
http://www.anythingxtreme.com/Trinity-Spyder-MR-Accurate-Barrels-P15891C905.aspx
http://www.actionvillage.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/DisplayProductInformation-Start;sid=eg5Z6_fqRhFZL7KxOtqZQ_1MciOcInZbeds=?Pro ductID=IcjAqArbWt4AAAEMNXf6Yfm0
http://www.actionvillage.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/DisplayProductInformation-Start;sid=eg5Z6_fqRhFZL7KxOtqZQ_1MciOcInZbeds=?Pro ductID=2wPAqArbwN8AAAEMGHf6Yfm0
http://www.actionvillage.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/DisplayProductInformation-Start;sid=eg5Z6_fqRhFZL7KxOtqZQ_1MciOcInZbeds=?Pro ductID=PCvAqArbfHcAAAEFqPkC1H2k
http://www.octanegear.com/index.asp?PageAction=VIEWPROD&ProdID=2202

darth massacre
11-15-2006, 10:11 PM
I believe these fits with the shroud on too.


Lapco Bigshot 14" (http://www.octanegear.com/index.asp?PageAction=VIEWPROD&ProdID=3512)

I'm using this one, fits as advertised, looks real sexy but long n heavy.
Opsgear fluted barrel 18" (http://www.opsgear.com/MR2-M82A1-18-inch-Fluted-SNIPER-Paintball-Barrel?sc=22&category=1638)

wylde01
11-18-2006, 07:01 PM
has anyone tried the empire revolver kit on the mr2 yet? or know of anyone that has?

wylde01
11-22-2006, 06:12 PM
what about the stiffi barrel? does it fit or is it too big?

zionfreak
11-22-2006, 08:12 PM
So is it safe to have the shroud off and still play?

wylde01
11-23-2006, 05:35 PM
yes you can take off the shroud and be safe, ive done it quite a few times when using a barrel kit. theres nothing thats open in that area that you could get dirt or anything into.

zionfreak
11-24-2006, 08:12 AM
Thanks, I was a little nervous when I first turned on my valve without the shroud on.

zionfreak
11-24-2006, 05:42 PM
Does anyone know if the BT AK-47 Apex barrel fits the MR2

Maxx-Damage
11-24-2006, 06:09 PM
It should if the M16 fits.

wylde01
11-24-2006, 06:29 PM
yea i dont know from experience but it should since the reg. apex barrel fits and also what max said that the m16 one fits

darth massacre
11-25-2006, 01:00 AM
If there's clearance for the shroud then it should fit. The catalog pictures on ActionVillage seems to support what everyone said here.

Link to Site here. (http://www.actionvillage.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/BrowseCatalog-Start;sid=oubJV3VN8O3JcDAlp70J_3_rB6Z8i_T8oTM=?Cat egoryName=paintball-paintball-barrels-bt-barrels)

The extension looks like it will clear the shroud safely.

QuiGonKen
11-26-2006, 10:11 PM
i picked up the SP tactical 16'.....$40 on sale...
http://www.pbreview.com/products/reviews/4366/

i was supposed to get the bigshot but apparently lapco changed the design flaring it at the bottom so it wouldnt fit the MR2's....if ur thinkin of getting the BIGSHOT...try it out first..just in case...

wylde01
01-02-2007, 11:19 AM
hey has anyone tried the trinity barrel with suppressor yet? its the second one on that list that MDC put up. it looks like a good barrel but i dont know if it fits?