PDA

View Full Version : Spimmy Problem


canthelpitimaguy
11-08-2006, 02:46 PM
I didnt know were to put this so i just put it here.

Basiclly i want to get bounce out of my Frenzy 124.7 boarded spimmy.

ive been working at it for a day now. i want to be able to use it in tornys.

If i need to use a different board or trigger, just lmk, i can get those things. I just want the bounce GONE!!!

thanks for you help.

big_daddy_d
11-08-2006, 02:47 PM
play with the settings, may have to change out springs etc...

canthelpitimaguy
11-08-2006, 02:49 PM
well i played with the settings, and i put debounce as high as it would go, and M bounce at 2. What springs would i have to change?

shunut
11-08-2006, 04:25 PM
PBN has some good settings for that board, you'll probably find more answers there. I have the same board in my Spimmy and had no bounce, however I can't remember what the settings are off the top of my head. Really because everybody has their trigger setup differently trial and error is the best way to get rid of bounce.

Drefish99
11-08-2006, 04:36 PM
Rendition Intimidator Settings- BIP 2ms, Dwell 9ms, Bolt Forward/Delay 15ms, LPR @ 80psi, Mbounce @ 1, Debounce @ 4, eyes on FORCE, .693 or .696 barrel, Reloader on Setting 1 or 2, NEVER 3, spyder detents from ebay

canthelpitimaguy
11-09-2006, 09:40 AM
Thanks, ill try that.

FredPo
11-09-2006, 05:33 PM
Rendition Intimidator Settings- BIP 2ms, Dwell 9ms, Bolt Forward/Delay 15ms, LPR @ 80psi, Mbounce @ 1, Debounce @ 4, eyes on FORCE, .693 or .696 barrel, Reloader on Setting 1 or 2, NEVER 3, spyder detents from ebay
This is the way to do it.

Fred