PDA

View Full Version : polish internals


cheeseheads2887
10-21-2006, 11:20 AM
what internals do i polsih, and what kind of polish do i use?

vikingshadow
10-21-2006, 03:03 PM
Polish your bolt (if it's aluminum) your striker (also called the hammer) your sear and the inside tubes (don't sand the tubes, just run some polish on a rag down inside and buff it up good.

vwjimmy
10-21-2006, 04:01 PM
You can hit it lightly (striker) with some emery cloth first too...