View Full Version : low pressure

Oscum Guy
10-18-2006, 02:33 PM
whats the cheepest way to get my spyder electra acs below 130 psi so i can fill an hpa tank with an air compressor that only goes up to 130 psi? (yes i am that cheep)

10-18-2006, 02:35 PM
ya i wanna know too...but i don't care for being cheap...tell me what i need

10-18-2006, 03:01 PM
Um... 130 psi will shoot your ball maybe 3 feet? But your best bet to make it LP is to buy an assult block, a reg, spring kit, ASA, and a low pressure bolt.

10-18-2006, 03:10 PM
the cheapest way to do that is umhh, get a new gun

Hob Hayward
10-18-2006, 03:12 PM
There is no way you can get a spyder to operate on 130 psi. At least without having unusable efficiency. Forget the idea of using a 130 psi compressor to give tank fills. Not to mention that you'd probably get about 110 shots before the pressure dropped even lower to the point of unusability.

10-18-2006, 03:36 PM
you couldnt get a spyder to run on 130 psi with out a high enough fps to play. If you want to save money on fills find a field with unlimited air refills.

10-18-2006, 05:40 PM
thats why i said buy a new gun

10-18-2006, 06:25 PM
My t-1 fenix runs at 180-190 at 250fps... :)

10-18-2006, 06:40 PM
just a question about lp...... is it for just experimenting on your gun or for like tournament stuff because ive seen most people running like 250 psi and go about 250 fps and usually when i go paintballing me and my friends go at 300 fps

10-18-2006, 06:43 PM
Its for more efficiancy.

10-19-2006, 08:44 AM
get a vs

Oscum Guy
10-19-2006, 11:59 AM
the VS's go down to 200 out of the box with wave balancing system (which i have no i dead to what it does?) alright thanks for the advice i guess ill just refill it at a shop then. also ive heard this many times and dont know what it is or does; an assault block.

10-19-2006, 07:10 PM
assault block is a replacement for your stock vertical adapter. do a search and find all the info you need.

Oscum Guy
10-22-2006, 09:25 AM
thot so. thanks