PDA

View Full Version : PILOT ACS questions


ace_spaid
10-18-2006, 12:23 PM
is this feed neck good for the PILOT ACS? will be using the HALO B loader with it. it is the LAPCO CLAMPING SPYDER FEED NECK.

http://www.actionvillage.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/DisplayProductInformation-Start;sid=CXloUxBHe2toxlVxce-o-xrhrDndj8kNQTE=?ProductSKU=011-198-0009

ace_spaid
10-18-2006, 12:26 PM
by the way this will be my first spyder gun

PumaPride04
10-18-2006, 12:28 PM
it is not a clamping if you want a clamping here is one
http://www.actionvillage.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/DisplayProductInformation-Start;sid=Wz3A7RuuZTHAi16Y1RkARRFnE1Ll_sLkE3U=?Pro ductID=vI7AqArbJ4wAAAEEt17BwvfY
or this
http://www.actionvillage.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/DisplayProductInformation-Start;sid=Wz3A7RuuZTHAi16Y1RkARRFnE1Ll_sLkE3U=?Pro ductID=B5LAqArbL3cAAAEFMfYC1H2k

ace_spaid
10-18-2006, 12:31 PM
what about this one? what is the difference between all that we have listed? i thought the lapco clamped by screwing it tight. http://www.actionvillage.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/DisplayProductInformation-Start;sid=Wz3A7RuuZTHAi16Y1RkARRFnE1Ll_sLkE3U=?Pro ductID=KnrAqArbdksAAAECDWU0F1qE

PumaPride04
10-18-2006, 12:36 PM
yea but the ones you have posted you have to screw tight the ones i posted are tightened by the little handle on the side

Sandman_Bravo
10-18-2006, 01:16 PM
I had the trinity one ond it worked ok until the clamping bolt broke. Now I have a Sundragon unit (made by ccm) and it seems to hold even tighter. btw- I used both a re-loader and a re-loader b with it on my pilot.

http://www.sundragonpps.com/catalog/item/3373201/2940771.htm

Hob Hayward
10-18-2006, 01:33 PM
I have the NDZ, its excellent, and I'm sure you can get it for less than 38$, I paid 25 for it new. The CCM is also a good choice.

pb34
10-18-2006, 03:30 PM
Yea, I bought the CCM from sundragon and it works great. It's also a good price.

08Lud08
10-18-2006, 03:44 PM
the ones that you screw down to tighen dont really hold the hopper down tight enough get a clamping one like suggested in the posts above.

JMotioN
10-19-2006, 07:09 AM
make sure to get one without holes and if you dont get one without a clamp dont get one at all unless you have a stock 200 round feeder and not an electric one. i made that mistake and now i spent about 30 all together for a hopper instead of just 15 for one.