Vs2 Air Pressure rise

[nitrobassboats]

Hi Guys,
I was test firing my new VS2 and the marker seemed to have some re cocking issues at 200 psi, then another strange thing happened after i recocked and shot a few more it didnt recock yet again but the pressure gauge immediately started rising and was on it s way past 300 when i shut it off. Anyone have any ideas as to why the pressure would all of asudden rise on its own ????
nitro

[bigred76]

Take apart and lube the regulator. What air source were you using?

[DRAGON]

Are you using C02? -

[TheRedBarron]

Are you using C02? -
Sounds like it to me.

[CareBear-Killer]

sounds like co2 expanded after the reg.

If you were using n2/hpa, and it was rising, i would check the reg. if the reg checks out and is lubed up, then i would contact kingman. reg may be defective?

[nitrobassboats]

Sorry i didnt mention the air source,indeed it was Air 47/3000
i will say after removing the air after this happened and putting it back on it seemed to be back to normal.......
i will check the regulator and lube it if neceesary,,,
i have never seen that before
Thanks guys:rolleyes:

[DRAGON]

Have you lubed it at all since you received it? -

[nitrobassboats]

Hi Dragon,
Yes i have taken it apart and lubed it all up , and have run a case through it and it hasnt done this again.
thanks for the info
Nitro:D